If trowel marks are visible, let surface dry for at least another hour before sanding to further smoothen surfaces. Let it dry for at least 1 hour before applying the second coat. Using a steel trowel, apply a thin layer of mixture on the surface by firmly pressing the edge of the trowel on the concrete until all areas are covered. Steps: Clean the concrete surface thoroughly, removing any dirt, debris, or loose particles. Use Portland cement (for ordinary cement color) or white cement (to produce a white finish). Put K-201 High-Performance Acrylic Skimcoat in a suitable container and mix it with sifted cement at a 1:1 ratio by weight until a lump-free, homogenous paste is achieved. Plastered walls should already be cured for at least 14 - 28 days prior to the application of a skimcoat. Always dampen the concrete before application. Defects on concrete like plumbness that are more than 3mm thick should be addressed by using exterior renders. Surface should be clean and dry, free from oil, grease, dirt, contaminants, and all loose grit and mortar. SERVICE CONDITION: Do not apply product on painted surface. MIXING RATIO: Approximately 5-kg cement per 4-Liters of K-201 High Performance Acrylic Skimcoat *Depending on surface texture and porosity THEORETICAL COVERAGE PER 4-LITERS: 10 sq. PRINCIPAL USES: It is ideal for interior and exterior concrete surfaces. Then, there’s spot priming and finally the wall is ready for the topcoat (a.k.a. It’s used to go over any final surface defects. When painting a new wall and a primer has already been applied, putty is the next step. Minimizes cracking and improves water resistance Putty, on the other hand, is part of the painting system itself.Fixes wall imperfections from 2mm to 3 mm thick.This pro-grade mix delivers superior bond to existing. Thickness/Depth: 364mm: Pack Size: 23kg: Application: Exterior: Length: 0.286m: Sku: 1295187: Unit: Each: Colour: White: Pack Quantity: 1. Its used to repair damaged walls and smooth down intentionally applied wall texture. It dries to a smooth cement finish and it repairs bubbles, honeycomb, and concrete defects such as waviness and plumbness from 2mm to 3mm thick. Restore aged, damaged concrete surfaces with Flo-Coat Concrete Resurfacer. A skim coat is a thin layer of drywall joint compound (also known as mud) that gives walls a glass-smooth finish. DESCRIPTION: Konstrukt ™ Permaplast ™ K-201 High Performance Acrylic Skimcoat is a specially formulated bonding paste that is mixed with cement and applied on interior and exterior concrete substrates to correct surface imperfections prior to painting.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |